Start with the application branch
Record engine, market, housing label, rated output, pulley ribs and diameter, mounting centers, rear terminals and regulator connector key.
A charging warning can result from belt, battery, wiring or control faults. Do not identify the alternator from voltage symptoms alone.
Identification checkpoints before price comparison
For alternators, record engine and destination market, verify output label and housing marks, and photograph pulley, mounts and regulator connector on both the installed and removed component.
Scoped OE reference
| Reference | Catalogue scope used for identification |
|---|---|
| 31100-5PA-A02 | Honda DreamShop starting reference for a selected 2024 Civic sedan 1.5T EX CVT alternator; use only after vehicle-specific confirmation and do not extend to 2.0L or earlier production. |
Reference 31100-5PA-A02 is retained only as a alternators identification lead; the submitted vehicle, installed component and any later supersession must remain within its stated catalogue boundary.
Common order boundaries
Build a comparable B2B order line
Keep output and engine branches separate; state whether pulley and terminal protection are included in the quoted assembly.
Quote complete alternator assembly separately from alternator with pulley, documenting trial and repeat quantity, destination, Incoterm, label requirements and included hardware for that SKU.
Export packing checkpoint
Use a fitted cradle, protect pulley grooves and electrical studs, cap connectors and keep moisture away from windings.
Common buyer questions
Which Civic details separate alternators variants?
Record engine, market, housing label, rated output, pulley ribs and diameter, mounting centers, rear terminals and regulator connector key. Record engine and destination market, output label and housing marks and pulley, mounts and regulator connector before comparing candidates.
What should a alternator photograph show?
Photograph the complete installed location and removed component, then add clear views of pulley, mounts and regulator connector, mounting points and every connector, port or seal. Use named endpoints and units for any measurement.
How should the listed OE reference be used for Alternators?
For alternators, the displayed reference is a narrow catalogue starting point only. Keep its visible vehicle boundary attached and confirm the installed component plus any later supersession before quotation.
How should complete alternator assembly be prepared for export?
Keep output and engine branches separate; state whether pulley and terminal protection are included in the quoted assembly. Use a fitted cradle, protect pulley grooves and electrical studs, cap connectors and keep moisture away from windings. State quantity per SKU, destination, packing and buyer-label requirements separately.