Start with the application branch
Confirm rotor diameter and thickness, bracket spacing, hose port, bleed-screw position, piston count and whether carrier, pads, actuator and hardware are included.
A painted finish or similar casting outline does not establish brake-package equivalence. Safety-critical brake specifications require qualified verification and installation.
Identification checkpoints before price comparison
For brake calipers, record front/rear axle and side, verify standard, si or type r package, and photograph piston and bracket dimensions on both the installed and removed component.
Scoped OE reference
Research did not reconcile a stable Civic reference across front/rear axle and side, standard, si or type r package and piston and bracket dimensions; an old label, casting or vehicle-specific catalogue result is still required. Use a clear record of piston and bracket dimensions to continue the review without assigning a guessed number.
Common order boundaries
Build a comparable B2B order line
Send axle/side, rotor and bracket measurements, casting marks, hose and bleed orientation and exact carrier or actuator scope.
Quote front floating caliper separately from rear caliper with epb provision, documenting trial and repeat quantity, destination, Incoterm, label requirements and included hardware for that SKU.
Export packing checkpoint
Plug hydraulic ports, retract and protect pistons, isolate heavy carriers, control residual fluid and keep side labels visible through outer packing.
Common buyer questions
How does front/rear axle and side change the Civic brake caliper order?
Confirm rotor diameter and thickness, bracket spacing, hose port, bleed-screw position, piston count and whether carrier, pads, actuator and hardware are included. Record front/rear axle and side, standard, si or type r package and the installed part evidence before treating candidates as comparable.
Which views document piston and bracket dimensions for Brake Calipers?
Photograph the installed location, the complete removed brake caliper, piston and bracket dimensions, every connector or fluid interface and the mounting points. Add a ruler view with named endpoints where dimensions are relevant.
Why is no starting number shown for Brake Calipers?
Research did not reconcile a stable Civic reference across front/rear axle and side, standard, si or type r package and piston and bracket dimensions; an old label, casting or vehicle-specific catalogue result is still required. For brake calipers, use the old reference, label, casting and vehicle record rather than borrowing a number from a visually similar Civic branch.
How should front floating caliper be separated for trade packing?
Send axle/side, rotor and bracket measurements, casting marks, hose and bleed orientation and exact carrier or actuator scope. Apply this packing control: Plug hydraulic ports, retract and protect pistons, isolate heavy carriers, control residual fluid and keep side labels visible through outer packing. Quote front floating caliper as its own SKU with trial and repeat quantity, destination and buyer-label requirements.