Civic Parts SupplierPOPXA sourcing deskStart parts request
Brake Parts

Honda Civic ABS Wheel Speed Sensors: Axle, Side & Harness Guide

Wheel-speed sensors depend on axle, side, sensor nose, encoder system, cable route, connector and sometimes an electronic parking-brake harness boundary.

OE numbers and page-matched generic imagery support identification only; confirm the installed component and complete vehicle evidence.

Physical wheel speed sensors with molded heads, long cables, keyed connectors, grommets and routing clips

Start with the application branch

Compare sensor head and mounting tab, cable length, grommet positions, clip sequence, connector key and whether the rear request is a sensor or combined harness.

A fault code points to a circuit, not a part number. Hub encoder damage, wiring faults and incorrect position must be separated before sourcing.

Identification checkpoints before price comparison

Front/rear axle and side
Sensor head and mounting tab
Cable route, grommets and clips
Connector and EPB-harness boundary

For abs wheel speed sensors, record front/rear axle and side, verify sensor head and mounting tab, and photograph cable route, grommets and clips on both the installed and removed component.

Scoped OE reference

ReferenceCatalogue scope used for identification
57455-T20-A01Selected 2022 Civic sedan/hatchback front-left speed-sensor starting branch; not evidence for front-right, rear or Type R variants.

Reference 57455-T20-A01 is retained only as a abs wheel speed sensors identification lead; the submitted vehicle, installed component and any later supersession must remain within its stated catalogue boundary.

Common order boundaries

Front left speed sensor
Front right speed sensor
Rear sensor/harness assembly
Four-corner sensor set

Build a comparable B2B order line

Send diagnostic position, axle/side, hub/encoder context, full cable routing, connector photos and whether a separate EPB harness is required.

Quote front left speed sensor separately from front right speed sensor, documenting trial and repeat quantity, destination, Incoterm, label requirements and included hardware for that SKU.

Export packing checkpoint

Protect sensing tips and plug locks, use large cable coils, immobilize clips and keep every side/axle label attached to its own sealed bag.

Common buyer questions

How does front/rear axle and side change the Civic abs wheel speed sensor order?

Compare sensor head and mounting tab, cable length, grommet positions, clip sequence, connector key and whether the rear request is a sensor or combined harness. Record front/rear axle and side, sensor head and mounting tab and the installed part evidence before treating candidates as comparable.

Which views document cable route, grommets and clips for ABS Wheel Speed Sensors?

Photograph the installed location, the complete removed abs wheel speed sensor, cable route, grommets and clips, every connector or fluid interface and the mounting points. Add a ruler view with named endpoints where dimensions are relevant.

What boundary applies to reference 57455-T20-A01?

For abs wheel speed sensors, 57455-T20-A01 remains an identification lead only within this boundary: Selected 2022 Civic sedan/hatchback front-left speed-sensor starting branch; not evidence for front-right, rear or Type R variants. Confirm the installed component and any later catalogue supersession before quotation.

How should front left speed sensor be separated for trade packing?

Send diagnostic position, axle/side, hub/encoder context, full cable routing, connector photos and whether a separate EPB harness is required. Apply this packing control: Protect sensing tips and plug locks, use large cable coils, immobilize clips and keep every side/axle label attached to its own sealed bag. Quote front left speed sensor as its own SKU with trial and repeat quantity, destination and buyer-label requirements.

Continue the match

WhatsAppParts request